FOUR PLAYER INSTRUCTION BOOTLET WRITTEN INTO ASCII BY Martin Nielsen (26th April 1997) - d0p@sofi.ah.dk
----------------------------------------------------------------------------- GAMEBOY FOUR PLAYER ADAPTOR INSTRUCTION BOOKLET -----------------------------------------------------------------------------
Thank you for purchasing the Four Player Adaptor for the Nintendo GAME BOY compact video game system. Now you and up to three others can play simultaneously on specially designed games displaying the Game Link symbol. Just plug in your GAME BOY systems and get ready for incredible competition and fun!
To use the Four Player Adaptor, you need: 1. One to four GAME BOY compact video game systems 2. One to four GAME BOY Game Paks of the same title (one Game Pak for each GAME BOY)
1. Make sure the power to all the GAME BOY systems are turned off
2. Insert the light grey connecta plug of the Four Player Adapter into the first (now called #1) GAME BOY system's EXT. CONNECTOR. This is the same connector that is normally used for the Game Link cable. (See Drawing B.)
3. Connect up to three (3) GAME BOY systems (#2, 3 and 4) to the Four Player Adapter by first plugging one end of a Game Link cable (acoessory #18100, induded with each GAME BOY when purchased) to the EXT CONNECTOR of each GAME BOY. Then plug the other end of each of the Game Link cables to The connector sockets on the Four Player Adapter. (See Drawing B.)
4. Insert the same Game Pak title into each of the GAME BOY systems.
5. Turn the power to GAME BOY #1 ON first. Then turn the power to the other GAME BOY systems ON last. (See Drawing C.)
6. For additional instructions, read the Game Pak manual for the game you are playing.
PRECAUTIONS AND PROPER CARE
* Make sure the power switch on the GAME BOY systems are turned off when connecting or unconnecting any cables or while loading or un-loading the Game Paks.
* Insert the same title of Game Pak into all the GAME BOY systems.
* After hook-up, make sure that the power to GAME BOY #1 is turned on first.
* Avoid exposure to high temperature, humidity or severe shocks.
* Keep in a clean, dry place. Water or foreign substances in the connectors or plugs will adversely effect operation.
* Use a soff damp cloth to remove any stains. Do not use abrasives, alcohol or solvents to clean.
* When disconnecting a cable from any socket, grasp the connector and pull slowly. DO NOT pull on the cord as damage may result.
