-------------------------------------------------------- Solder Side | Parts Side -------------------------+------------------------------ 2P Down | A | 1 | 1P Down 2P Up | B | 2 | 1P Up 2P Left | C | 3 | 1P Left 2P Right | D | 4 | 1P Right | E | 5 | | F | 6 | | H | 7 | ? | J | 8 | Service 2P Fire | K | 9 | 1P Fire 2P Missile | L | 10| 1P Missile 2P Start | M | 11| 1P Start Coin Switch #2 | N | 12| Coin Switch #1 Coin Counter #2 | P | 13| Coin Counter #1 Video Red | R | 14| Video Green Video Blue | S | 15| Video Sync | T | 16| Speaker | U | 17| Speaker +12 | V | 18| +5 | W | 19| +5 +5 | X | 20| +5 GND | Y | 21| GND GND | Z | 22| GND ------------------------------------------------------ Note that Video Ground must be connected to +5
*************************************************************************** **************************** BATTLELANE ADAPTER *************************** *************************************************************************** My board came with a fingerboard connector which plugs onto the BattleLane board and supplies the following pinouts. -------------------------------------------------------- Solder Side | Parts Side -------------------------+------------------------------ | A | 1 | | B | 2 | | C | 3 | | D | 4 | | E | 5 | Video Sync | F | 6 | Video Green Video Red | H | 7 | Video Blue GND | J | 8 | GND 1P Down | K | 9 | 1P Missile | L | 10| 1P Fire | M | 11| 1P Up 1P Right | N | 12| 1P Left 2P Start | P | 13| 1P Start | R | 14| | S | 15| Coin Switch #1 Coin Counter #1 | T | 16| Speaker | U | 17| Speaker +5 | V | 18| | W | 19| | X | 20| | Y | 21| | Z | 22| ------------------------------------------------------ Note that Video Ground must be connected to +5 There are also some labeled wires coming off the connector: GND (black and green) +5 (red) +12 (yellow)
